Salvo has manufactured 2 sizes of its Mojo DPV. It comes in a 25 amp and 42 amp Li-po powered versions. The Mojo's lower motor housing, nose cone and bulkheads are machined from solid delrin, and we had the body extruded from black PVC. There is a recess in the nose cone to make carrying the Mojo easier. They have a pistol style trigger for ease of operation. The entire trigger mechanism is completely enclosed for added protection. We used a linkage system instead of wires and springs for added reliability. The battery compartment is completely enclosed in case of a flood to protect the power pack. Each battery is protected from overcharge and over discharge. The battery electronics also has a balancing function to insure long life and full charge. The Li-po batteries are rated for 400 full duty cycles to 80% capacity. It is recommended to keep the batteries at 30 to 50% charge for long storage(over 1 month). The Mojo has 9 speed settings on the prop, and all props have been pinned for added security.
Mojo 25
-30.5"(77.2cm) in length -53lbs.(24kg) dry weight -Powered by a 25 amp Li-po battery -Motor is 1000rpm, 65 ft/lbs. of torgue -90 to 150 mins. run time (depending on drag and trim of diver) -Recharge time is 9 hours from full discharge -90 to 240 volt input charger -Comes with tow leash, motor compartment vacuum adapter, 2 spare o-rings, trim weights
Mojo 42
-33.5"(84.8cm) in length -60lbs.(27kg) dry weight -Powered by a 42 amp Li-po battery -Motor is 1000rpm, 65 ft/lbs. of torgue -150 to 250 mins. run time (depending on drag and trim of diver) -Recharge time is 14 hours from full discharge -90 to 240 volt input charger -Comes with tow leash, motor compartment vacuum adapter, 2 spare o-rings, trim weights
