Hydraulics International’s Rebreather Booster for Dive Center and Dive Boat Owners, answers multiple requirements. It ensures full 2400-3450 psi (166-238 Bar) rebreather bottle fills even if the oxygen supply drops below 500-psi (34 Bar). The unit may be driven:
• Manually, by means of its integral hand pump assembly option (hand pump assembly sold separately)
• a low pressure conventional air compressor, or
• Regulated high-Pressure air storage supply (SCBA bottles). Maximum 150-psi (10 Bar) air supply.
Options:
Integral hand pump assembly
Watertight protective case with wheels (22"L x 14"W x 9"H)
Specifications:
Dimensions:................13.25L x 3.25"D x 3.25"H Weight:..................................................9.5-pounds Pressure Ratio..................................................23:1 Maximum outlet pressure:...................3,450-psi
Performance:
Approximate fill-time for a 19 cu-ft REBREATHER to 2,400-psi*
System pressure after Equalization
Approx. fill-time
Approx. fill rates
2000-psi
1.0-minutes
3.0-scfm
1500-psi
3.1-minutes
2.3-scfm
1000-psi
7.3-minutes
1.5-scfm
500-psi
20-minutes
0.8-scfm
Above based on 90-psi drive air & 60 cycles a minute. Never exceed 70-100 psi/min fill rate for O2 service.
Specifications:PORT SIZES
Air drive: 1/4” NPTF
Gas inlet: -6 SAE (9/16” x 18 straight threads)
Gas outlet:-6 SAE (9/16” x 18 straight threads)
Exhaust: 1/4” NPTF
Remote pilot: 1/8” NPTF
See below for required fittings to attach to Golem Fill Whip
