|
 |
|
 |
| |
|
Now In:
Welcome to Golem Gear, Inc.

| Checkout our hottest specials! |
 |
No helium sensor to replace - ever!
Hi-tech analyzer for measuring nitrox and trimix gases. After inserting the analyzer adapter (included) to a bottle valve with a breathing mixture, the content of both oxygen and helium is shown as percentages directly on the display at the same time.
This trimx analyser reports "FOUL AIR" if the oxygen, nitrogen and helium can not be calculated due to contamination which is a major safety advantage over any other analyser.
Features
Operation Principle
A standard electrochemical sensor (R-17S) normally used in analyzers for diving is used to determine the oxygen content. The helium content is determined on the basis of measuring the speed of sound in the analyzed mixture.
The speed of sound depends on the content of helium and oxygen, and on the temperature of the mixture. The dependence of the speed of sound on pressure is marginal and can be ignored under normal atmospheric pressure. At 0°C the speed of sound is approximately 970 m/s in pure helium, 330 m/s in air, and 315 m/s in pure oxygen. Raising the temperature by one degree raises the speed of sound by approximately 0.175%. The speed of sound in the mixture is described as a non-linear equation of temperature, oxygen content and helium content.
The speed of sound is measured directly as the time it takes for an acoustic impulse to travel between two microphones. This measurement is taken alternately in both directions to eliminate the influence of the gas flow-rate.
Calibration
Every analyzer produced is tesed in the complete range of acceptable oxygen and helium values. It is tested in air, pure oxygen and pure helium as well as in 12 different calibration mixtures.
Includes
- Simple flow limiter for all valves.
OPTIONAL
Pressure sensor - the analyzer can measure pressure in the tank and gas mixture at the same time
Ohm-meter plugin - to check bulbs and cables
Voltmeter plug-in - to check batteries (lights, scooters...)
Flow Limiter for Inflator
Worldwide Power Supply (also works with 9V battery - included)
Hard and watertight Case.
professional flow limiter
connection hose
Firmware upgrades
The firmware in the He/O2 analyzer is continuously updated. The updates are user installable and can be downloaded here:
Price: $906.00
|
|
|
 |
Light Monkey 10 - 21 HID Primary Light
- 10aH Li-Po Battery: 300 minute burn time
- 1500 Lumen Output @ 6500 Kelvin
- 10.75" (27.2 cm) Length, 3" (7.5 cm) Diameter
- Dry weight 5.8 lb. (2.6kg), 2.5 lb. (1.1 kg) negative in-water
- 5 hour recharge from complete discharge
- 9.00 g ELC
- New Dry Lid is completely sealed providing protection from water intrusion due to a cut cord or switch boot
- Battery Canister is completely sealed preventing water intrusion due to improperly latched lid or forgotten o-ring
Free with purchase of 10Ah - 21W LED canister light
you get one Lola Backup light including the high tech mask mount. The light features one hand on/off.
and you also get one
EEZYCUT® Brand BlackTRILOBITE with Wrist Pouch & Replacement
Blades
Price: $1,379.97
|
|
|
 |
Technical wing for twin tanks (doubles). Rock solid construction. Streamlined for effortless swimming, low drag for scootering.
These wings are designed specifically for use with double cylinders. They provide 55 pounds/25l of lift. They are designed for use with medium- to heavyweight doubles and stage bottles. A 24-inch/60cm low-pressure inflator hose is included. Available in Black.
This wing is popular among many European cave divers, who appreciate its simple, streamlined design.
Wing Cover: Outer abrasion resistant shell made from Cordura 2000
Wing bladder: inner bladder made from RF welded CORDURA 560 with PU coating. It resists hydrolysis, low temperatures, and hydrocarbons.
Virtually indestructible. High quality Swiss RiRi zipper.
 |
 |
| Inflator hose with protection sleeve at the elbow |
Hi quality SS inflator with SS insert |
Regular Price: $390.00 On Sale For: $310.00
|
|
|
 |
Combo comes with 55 Lbs. wing, AL backplate with harness and harness knife.

Golem 55 Wing:
Technical wing for twin tanks (doubles). Rock solid construction. Streamlined for effortless swimming, low drag for scootering.
These wings are designed specifically for use with double cylinders. They provide 55 pounds/25l of lift. They are designed for use with medium- to heavyweight doubles and stage bottles. A 24-inch/60cm low-pressure inflator hose is included. Available in Black.
This wing is popular among many European cave divers, who appreciate its simple, streamlined design.
Wing Cover: Outer abrasion resistant shell made from Cordura 2000
Wing bladder: inner bladder made from RF welded CORDURA 560 with PU coating. It resists hydrolysis, low temperatures, and hydrocarbons.
Virtually indestructible. High quality Swiss RiRi zipper.
 |
 |
| Inflator hose with protection sleeve at the elbow |
Hi quality SS inflator with SS insert |
Regular Price: $530.00 On Sale For: $390.00
|
|
|
 |
Combo comes with 35 lbs. wing, tank bands, SS backplate with harness and FREE harness knife.

Golem 35 wing:
Technical wing for single tank configuration. Rock solid construction. Streamlined for effortless swimming, low drag for scootering.
These wings are designed specifically for use with single cylinders. They provide 35 pounds/18l of lift. They are designed for use with Aluminium and Steel single tanks. A 24-inch/60cm low-pressure inflator hose is included. Available in Black.
This wing is ideal for use with rebreathers. Its simple, streamlined design paired with low profile Golem Stream backplate creates unbeatable CCR kit.
Wing Cover: Outer abrasion resistant shell made from Cordura 2000
Wing bladder: inner bladder made from RF welded CORDURA 560 with PU coating. It resists hydrolysis, low temperatures, and hydrocarbons.
Virtually indestructible. High quality Swiss RiRi zipper. Two cam bands with stainless steel buckles and LP hose included. Two backplate attachment SS bolts and nuts are also included.
 |
 |
| Inflator hose with protection sleeve at the elbow |
Hi quality SS inflator with SS insert |
Regular Price: $530.00 On Sale For: $380.00
|
|
|
| more... |
|
|
|
|
 |
|
 |
|